Products / Filters

Filters for converters and power electronics

High level performance between 150 kHz and 30 MHz

This wide range of three phase filters offers the best design solution for interference suppression in converters and powerdrives applications.

  • Very high attenuation performance
  • Excellent saturation resistance
  • Safety screw terminals
  • Conception conforms to IEC 60939-2, UL 1283 und CSA C22.2 No. 8-M1986

Mechanical specifications

  • Manufacture: steel enclosure
  • Connections: safety terminal blocks
  • 6 mm² solid wire or 4 mm² flex wire for 8 A and 16 A units
  • 10 mm² solid wire, 6 mm² flex wire for 25 A
  • 16 mm² solid wire, 10 mm² flex wire for 36 A and 50A units
  • 35 mm² solid wire, 25 mm² flex wire for 64 A and 80A units
  • 50 mm² either solid or flex wire for 110 A units

Specification Sheet

Three phase  
Rated current : 8-110 A @ ϑa 40 °C
Rated voltage : 480 VAC 50/60 Hz
Leakage current : normal condition: < 3 mA
Test voltages (2 sec.) : line to ground 3000 VDC, line to line 2250 VDC
Climatic category : 25/100/21 acc. to IEC 60068-1
Temperature range : -25 °C to +100 °C
CodeIR
[A]		L
[mH]		C1
[nF]		 C2
[μF]		 C3
[μF]		 C4
[μF]		C5
[nF]		R1
[MΩ]		 R2
[MΩ]		Insertion loss
FP-8008-111A 8 3x100 100 1 - 2.2 10 1* 1*
FP-8016-111A 16 3x6 100 1 - 2.2 10 1* 1*
FP-8116-111A16 3x6100 1 - 2.2 10 1* 1*
FP-8125-111A 25 3x3 10 4.4 1 4.4 47 1 2.2
FP-8336-111A 36 3x2 10 4.4 1 4.4 47 1 2.2
FP-8350-111A 50 3x1 10 4.4 1 4.4 100 1 2.2
FP-8564-111A 64 3x0.6 10 4.4 1 4.4 100 1 2.2
FP-8780-111A 80 3x1 47 6.6 1 6.6 100 1 2.2
FP-88H1-111A 110 3x0.7 47 6.6 1 6.6 100 1 2.2

(*) Only one resistor

  • Dimensions
CCSP-6214-0201
Code A B C D E F G H I
FP-8008-111A 116 61 86 181 100 115 6.5 202 M6
FP-8016-111A 116 61 86 181 100 115 6.5 202 M6
FP-8116-111A 151 66 121 201 135 115 6.5 222 M6
FP-8125-111A 151 66 121 201 135 115 6.5 231 M6
FP-8336-111A 151 66 121 201 135 115 6.5 250 M6
FP-8350-111A 151 66 121 201 135 115 6.5 250 M6
FP-8564-111A 151 66 121 231 135 115 6.5 308 M6
CCSP-6214-0201
Code A B C D E F G H
FP-8780-111A 351 81 150 301 110 325 6.5x15 378
FP-88H1-111A 351 81 150 301 110 325 6.5x15 387

This wide range of three phase + neutral filters offers the best design solution for interference suppression in converters and powerdrives applications.

  • Very high attenuation performance
  • Excellent saturation resistance
  • Safety screw terminals
  • Conception conforms to IEC 60939-2, UL 1283 and CSA C22.2 No. 8-M1986

Mechanical specifications

  • Manufacture: steel enclosure
  • Connections: safety terminal blocks
  • 6 mm² solid wire or 4 mm² flex wire for 8 A and 16 A units
  • 10 mm² solid wire, 6 mm² flex wire for 25 A
  • 16 mm² solid wire, 10 mm² flex wire for 36 A and 50 A units
  • 35 mm² solid wire, 25 mm² flex wire for 64 A and 80 A units
  • 50 mm² either solid or flex wire for 110 A units

Specification Sheet

Three phase + neutral  
Rated current : 8-110 A @ ϑa 40 °C
Rated voltage : 275/480 VAC 50/60 Hz
Leakage current : normal condition: < 3 mA (only one phase connected)
Test voltages (2 sec.) : line to ground 3000 VDC, line to line 2250 VDC
Climatic category : 25/100/21 acc. to IEC 60068-1
Temperature range : -25 °C to +100 °C
CCSP-6214-0201
CodeIR
[A]		L
[mH]		C1
[nF]		 C2
[μF]		 C3
[μF]		 C4
[μF]		C5
[nF]		R1
[MΩ]		 R2
[MΩ]		Insertion loss
FW-8125-111A 25 3x2.4 10 4.4 1 4.4 47 1 2.2
FW-8136-111A 36 3x1.5 10 4.4 1 4.4 47 1 2.2
FW-8350-111A 50 3x1 10 4.4 1 4.4 100 1 2.2
FW-8364-111A 64 3x0.6 10 4.4 1 4.4 100 1 2.2
  • Dimensions
CCSP-6214-0201
Code A B C D E F G H I
FW-8125-111A 151 66 121 201 135 115 6.5 222 M6
FW-8136-111A 151 66 121 201 135 115 6.5 231 M6
FW-8350-111A 151 66 121 201 135 115 6.5 250 M6
FW-8364-111A 151 66 121 231 135 115 6.5 308 M6

This wide range of three phase filters offers the best design solution for interference suppression in converters and powerdrives applications.

  • Very high attenuation performance
  • Excellent saturation resistance
  • Safety screw terminals
  • Conception conforms to IEC 60939-2, UL 1283 und CSA C22.2 No. 8-M1986

Mechanical specifications

  • Manufacture: steel enclosure
  • Connections: safety terminal blocks
  • 6 mm² solid wire or 4 mm² flex wire for 8 A and 16 A units
  • 10 mm² solid wire, 6 mm² flex wire for 25 A
  • 16 mm² solid wire, 10 mm² flex wire for 36 A and 50A units
  • 35 mm² solid wire, 25 mm² flex wire for 64 A and 80A units
  • 50 mm² either solid or flex wire for 110 A units

Specification Sheet

Three phase  
Rated current : 8-110 A @ ϑa 40 °C
Rated voltage : 480 VAC 50/60 Hz
Leakage current : normal condition: < 3 mA
Test voltages (2 sec.) : line to ground 3000 VDC, line to line 2250 VDC
Climatic category : 25/100/21 acc. to IEC 60068-1
Temperature range : -25 °C to +100 °C
CodeIR
[A]		L
[mH]		C1
[nF]		 C2
[μF]		 C3
[μF]		 C4
[μF]		C5
[nF]		R1
[MΩ]		 R2
[MΩ]		Insertion loss
FP-7008-111D 8 4x8 100 1 - 2.2 10 1* 2.2
FP-7016-111D 16 4x5 100 1 - 2.2 10 1* 2.2
FP-7116-111D16 4x5100 1 - 2.2 10 1* 2.2
FP-8225-111D 25 4x2.6 10 4.4 1 4.4 47 1 2.2
FP-8436-111D 36 4x1.8 10 4.4 1 4.4 47 1 2.2
FP-8450-111D 50 4x0.8 10 4.4 1 4.4 100 1 2.2
FP-8664-111D 64 4x0.6 10 4.4 1 4.4 100 1 2.2
FP-8980-111D 80 4x0.9 47 6.6 1 6.6 100 1 2.2
FP-97H1-111A 110 4x0.5 47 6.6 1 6.6 100 1 2.2

(*) Only one resistor

  • Dimensions
CCSP-6214-0201
Code A B C D E F G H I
FP-7008-111D 116 61 86 181 100 115 6.5 217 M6
FP-7016-111D 116 61 86 181 100 115 6.5 217 M6
FP-7116-111D 151 66 121 201 135 115 6.5 237 M6
FP-8225-111D 151 66 121 201 135 115 6.5 237 M6
FP-8436-111D 151 66 121 201 135 115 6.5 250 M6
FP-8450-111D 151 66 121 201 135 115 6.5 250 M6
FP-8664-111D 151 66 121 231 135 115 6.5 308 M6
CCSP-6214-0201
Code A B C D E F G H
FP-8980-111D 351 81 150 301 110 325 6.5x15 378
FP-97H1-111A 351 81 150 301 110 325 6.5x15 387